The McHale V6750-II is a variable chamber round baler equipped with a 15-knife chopper unit and rotor. A double drive system aids belt rotation and bale formation to allow the machine to operate in the toughest of conditions. The machine comes with centralised grease blocks as standard. Automatic greasing is available as an optional extra.
Features Include:
- 2.1m Profi-Flo Camless Pick-Up
- 15-Knife Chopper Unit with Heavy Duty Rotor
- ISOBUS Terminal with a 10” touch screen
- Drop Floor Unblocking System
- 3-Endless Belts
- Auto Greasing
- Continuous Oiler System
- High Performance Stretch Net System
- 50mm (2”) Double Race Chamber Bearings
- Knife Pressure Display
- Knife Position Sensor
- Drop Floor Sensor
- Bale Kicker
Features
ISOBUS/ISOPlay
ISOBUS Terminal with a 10” touch screen
Camless Pick Up
The 2.1m camless pick-up runs smoothly, particularly in short crop, and requires less maintenance due to a reduced number of rotating parts. All camless pick-ups in the McHale variable chamber baler range are fitted with six tine bars to provide excellent ground cleaning and fast delivery of crop to the rotor.
15-Knife Chopper Unit
The McHale V6750-II is equipped with a 15-knife chopper unit and rotor. As crop enters the spiral rotor, pairs of rotating flights feed the crop through the chopping unit. The double flights on the rotor ensure high output, while the spiral layout reduces the load peaks as the machine works in heavy swaths. The rotor design encourages a uniform crop flow, which reduces the risk of blockages, thus maximising output. With all 15 knifes engaged, a theoretical chop length of 65mm is delivered. Knifes can be engaged and disengaged from the cab.
Knife Position Sensor
To ensure that the machine always delivers a good chop quality, two monitoring systems have been put in place on the V6750-II baler. Firstly, knife working pressure is monitored and displayed on the control console. If the knife pressure becomes too high or too low, audible and graphic alarms are activated to notify the operator. Secondly, a sensor monitors the distance between the top of the knife and the spine on the rotor to ensure the knives are fully engaged. If the knife moves out of position for any reason the operator is notified via the control console.
Specifications
Weight & Dimensions
Width - 2.54/2.58m* depending on tyre size
Length - 5.1m
Height - 2.75m
Weight - 4,540kg
Working width - 2.10m
Pick Up
Tine Bars - 5
Tine Spacing - 55mm camless
Crop Roller - Standard
Pick Up Guide Wheels (pneumatic) - Standard
Chopper Unit
Number of Knives - 15
Theoratical Chop Length - 65mm
Knife Protection - Hydraulic
Knife Deactivation - Hydraulic from Cab
Unblocking System - Drop Floor
Bale Chamber
Diameter (m) - 0.6m to 1.68m
Width (m) - 1.23
Bale Chamber Feed - 15 Knife Chopper Feed Rotor
Number of Belts - 3
Binding
Binding Material - Net
Control - Manual or Automatic
Binding System - High Performance Netter
Binding Adjustment - In Cab
Binding Roll Capacity - 1+2 Storage
Transmission
Gearbox - Split Drive
Main Drive Protection - Cam Clutch
Pick Up Protection - Slip Clutch
Chain Lubrication - Continuous
Bale Chamber - Double Drive
Control
Control System - ISOBUS
Operation - Semi Automatic
Density Adjustment - In Cab
Bale Size Adjustment - In Cab
Other
Axle - 8 Stud
Brakes - Option: Air / Hydraulic
Tyres Standard - 500/50/22.5
Tyres Optional - 560/45/22.5
Road Lights - Standard
Bale Kicker - Standard
Tractor
Minimum Hydraulic Flow - 30 Litres / min at 180 bar
Hydraulic System - 2 double acting spools, 1 free flow return
Electronics - 12 Volt DC, 20 amp
Minimum PTO Requirements - 60kw (80hp)
