The McHale V6760-II is a fully automatic machine fitted with a 15-knife chopper unit and heavy-duty rotor. As the highest spec machine in the range, it is ISOBUS compatible with the option of using McHale’s ISO-Play terminals, to allow the operator to experience the highest level of customisation and machine performance.
Features Include:
- 2.1m Profi-Flo Pick-Up
- 5 Knife Chopper with Heavy Duty Rotor
- Drop Floor Unblocking System
- 3-Endless Belts
- Automatic Greasing
- Continuous Oiling System
- High Performance Stretch Netter
- Mechanical Tailgate Locking
- 1¼” Chain on the Bale Chamber
- ISOBUS/ISO-Play
- 50mm (2”) Double Race Chamber Bearings
- Knife Pressure Display
- Knife Position Sensor
- Drop Floor Sensor
- 500/50/22.5 Tyres
- Active Bale Kicker
- 80HP minimum tractor requirement
Features
2.1m Profi-Flo Pick-Up
The 2.1m camless pick-up runs smoothly, particularly in short crop, and requires less maintenance due to a reduced number of rotating parts. All camless pick-ups in the McHale variable chamber baler range are fitted with six tine bars to provide excellent ground cleaning and fast delivery of crop to the rotor.
ISOBUS/ISOPlay
ISOBUS Terminal with a 10” touch screen
Active Bale Kicker
To complete the fully automatic process on the V6760-II, the Active Bale Kicker lowers or raises hydraulically as the chamber opens or closes to eject the bale with more momentum. This ensures the ejected bale is clear of the door swing zone and removes the need for the operator to reverse when ejecting the bale.
Active Density Control
All McHale V6760-II machines feature Active Density Control which electronically varies the density pressure regulation at predetermined points of the baling process. This results in increased bale density due to higher loads exerted on the bale at the optimum stages of bale formation.
Specifications
Weight & Dimensions
Width - 2.54m / 2.58m*
Length - 5.1m*
Height - 2.75m
Weight - 4,580kg
* Value will vary depending on specification
Pick Up
Working Width: 2100mm
Tine Bars - 6 on Camless Pick-up
Tine Spacing - 55 mm
Crop Roller - Standard
Pick Up Guide Wheels (pneumatic) - Standard
Chopper Unit
Number of Knives - 15
Theoratical Chop Length - 65mm
Knife Protection - Hydraulic
Knife Activation - Electronic Control
Unblocking System - Automatic Drop Floor (When connected to an ISOBUS enabled tractor)
Bale Chamber
Diameter (m) - 0.6 to 1.68
Width (m) - 1.23
Bale Chamber Feed - 15 Knife Chopper Feed Rotor
Number of Belts - 3
Binding
Binding Material - Net
Control - Automatic or Manual
Binding System - High Performance Netter
Bind Roll Capacity - 1+2 Storage
Bind Adjustment - In Cab
Transmission
Gearbox - Split Drive
Main Drive Protection - Cam Clutch
Pick Up Protection - Slip Clutch
Chain Lubrication - Continuous
Bale Chamber - Double Drive
Control
Control System - ISOBUS
Operation - Fully Automatic
Density Adjustment - In Cab
Bale Size Adjustment - In Cab
Camera - 1x Camera
Other
Axle - 8 Stud
Brakes - Option: Air / Hydraulic
Tyres Standard - 500/50/22.5
Tyres Optional - 560/45/22.5
Road Lights - Standard
Side Tip - N/A
Bale Kicker - Hydraulic
Tractor
Minimum Hydraulic Flow - 30 l/min @180 bar
Hydraulic System -Open Centre, Closed Centre or Load Sensing
Electronics - 12 Volt DC, 20 amp
Minimum PTO Requirements - 60 kW (80hp)
