McHale has developed a reputation for providing high-output machinery with excellent reliability, operator comfort, and strong resale value. Building on their comprehensive range of grass machinery, McHale now introduces their new range of PROPEL tedders.
The McHale PROPEL T10-1260 is the largest machine in the range. This trailed tedder is equipped with ten rotors to provide a working width of 12.6 m. This high-capacity machine is transported on a carriage frame, which links the tedder to the tractor during operation.
A two-point linkage with a pivoting headstock connects the tedder to the tractor, while all unfolding, lifting, and lowering actions can be carried out using two double-acting spools. The machine runs on wide transport tyres positioned in front of the rotors, enabling them to float along the ground for clean tedding of the crop.
- Working width: 12.6m
- No. of Rotors: 10
- Rotor diameter: 1.58m
- Tine arms per rotor: 7
- Power requirement: 50kW (67HP)
- Attachment: Lower Linkage (CAT II)
ProPel T10-1260 Tedder
The McHale PROPEL T10-1260 is a high-capacity trailed tedder fitted with ten rotors to provide a working width of 12.6 m. This straightforward, highly efficient machine is equipped with a long carriage frame that connects the tedder to the tractor during operation and serves as a carrier during transit. The machine is attached using a two-point linkage and can be easily unfolded, lifted, and lowered using only two double-acting spools. Wide transport tyres positioned in front of the rotors allow the rotors to float freely, providing superior flotation and helping to prevent soil contamination.
Specifications
WEIGHTS & DIMENSION
Transport Length: 5.8m
Transport Width: 2.99m
Transport Height: 2.6m
Weight: 3,005kg
Tractor Attachment
Minimum Power Requirement: 50 kW (67 HP)
Attachment: Trailed/ CAT II lower linkage
Recommended PTO Speed: 580 rpm (SAE 6 spline PTO shaft)
Lighting: 12 V / 7-pin socket
Hydraulic Systems: 1x SA, 2x DA hydraulic supply (1 with float)
Minimum Flow Rate: 20 l/min (4.54 gal/min) @ 180 bar (2,610 psi)
Machine Specifications
Number of Rotors: 10
Rotor Diameter (including tines): 1.58m
Working Width: 12.6 m
Number of Tine Arms: 7 (per rotor)
Chassis Tyres (380/55-17): 2
Rotor Tyres (170/60-8): 10 (1 per rotor)
Optional Equipment
Spare Rotor Wheel: Optional
Headland Management System: Optional
PROPEL T10-1260 Tedder
Click below to view our latest brochure or make an enquiry today.
ENQUIRE NOWTedder Range
